## Unit Conversion

With `in (into, as, to)`

you can convert one unit into another. Numi will automatically convert units to perform operations if it's needed during conversion.

```
$30 in Euro
$30 CAD + 5 USD - 7EUR
```

## Time Zone Conversion

Use `time`

or `now`

function to get time in your time zone. You can prefix this functions with time zone location (or use `in`

with time zone suffix) to get current time for specified location. Results are always in sync with global time, so, at any point of time you will get the right time.

It's also possible to convert specific time or date from one time zone into another. Or calculate difference between time in different time zones:

```
PST time
New York time
Time in Madrid
2:30 pm HKT in Berlin
```

App activation required for the time zone support

## Operations

You can use sign and word operators. Several expressions might be stacked together. Notice, expressions will be multiplied if used in parentheses one after another.

```
8 times 9
1 meter 20 cm = 120 cm
6 (3) = 18
```

Operation | Sample |
---|---|

Addition | +, plus, and, with |

Subtraction | -, minus, subtract, without |

Multiplication | *, times, multiplied by, mul |

Division | /, divide, divide by |

Exponent | ^ |

Bitwise And | & |

Bitwise Or | | |

Bitwise Xor | xor |

Left Shift | << |

Right Shift | >> |

Modulo | mod |

## Numbers

Besides decimal numeral system, it is possible to use numbers in binary, octal or hexadecimal form using appropriate prefix: `0b`

, `0o`

and `0x`

. You can use `sci`

or `scientific`

to format results in scientific notation.

```
0b110111011
0o1435343 in hex
5 300 in sci
```

## Currency

You can use ISO 4217 codes for currency (like USD, RUB, CAD etc). You can also use common currency names and signs, like `$`

for the US dollars, `roubles`

for Russian roubles, or `€`

for Euro. Numi updates currency rates several times a day using open exchange rates service. Numi also supports a huge list of cryptocurrencies with hourly rates updates.

App activation required for the cryptocurrency support

## Percentage

In addition to general percentage operations like adding or subtracting percent of value (`$10 - 40%`

), you also can use additional operations:

Operation | Example |
---|---|

Percentage value | 20% of $10 |

Adding percentage | 5% on $30 |

Substracting percentage | 6% off 40 EUR |

Percentage value of one value relative to another | $50 as a % of $100 |

Percentage addition of one value relative to another | $70 as a % on $20 |

Percentage subtraction of one value relative to another | $20 as a % off $70 |

Value by percent part | 5% of what is 6 EUR |

Value by percent addition | 5% on what is 6 EUR |

Value by percent substraction | 5% off what is 6 EUR |

## Scales

Scales used for shorter form of writing big numbers. Please note that one-letter scales are case-sensitive, since `m`

used for meters, and `K`

used for Kelvins. Supported scales: thousands (`k`

, `thousand`

), millions (`M`

, `million`

), billions (`billion`

).

```
$2k
2M eur
```

## Variables

You can declare variables and reuse them using the `=`

operator. Please note some characters and keywords cannot be used as a variable. For example, `K`

might be used as a temperature unit in Kelvin. Variable names should not contain whitespaces or special characters, and should not start with number:

```
v = $20
v2 = 5%
v times 7 - v2
v += $10
```

## Constants

Description | Value |
---|---|

Pi | 3.1415926536 |

E | 2.7182818285 |

## Functions

By default trigonometrical functions uses parameters in radians.

Description | Function | Example |
---|---|---|

N-th root | root | root 2 (8) |

Square root | sqrt | sqrt 16 |

Cubed root | cbrt | cbrt 8 |

Absolute value | abs | abs(-4) |

Logarithm | log | log 2 (10) |

Natural logarithm | ln | ln 3 |

Factorial | fact | fact 5 |

Rounding | round | round 3.45 |

Ceiling | ceil | ceil 3.76 |

Flooring | floor | floor 2.56 |

Sine | sin | sin 45° |

Cosine | cos | cos 3.45 |

Tangent | tan | tan 8 |

Arcsine | arcsin | arsin 30 |

Arccosine | arccos | arccos 85 |

Arctangent | arctan | arctan 9 |

Hyperbolic sine | sinh | sinh 3 |

Hyperbolic cosine | cosh | cosh 9 |

Hyperbolic tangent | tanh | tanh 11 |

## CSS

Numi supports several CSS units: pixels (px), points (pt), em. Em is set to 16 px by default, but you can assign different value to it. Conversion from screen units to other length units performed using pixel per inch value (ppi). By default `ppi`

is set to 96 pixels, which mean in every inch there're 96 pixels. You can set custom value for `ppi`

.

```
12 pt in px
em = 20px
1.2 em in px
1 inch in px = 96 px
ppi = 326
1 cm in px = 128,35 px
```

## Previous Result

Use `prev`

token to use result from previous line:

```
Cost: $20 + 56 EUR
Discounted: prev - 5% discount
```

## Sum

You can calculate sum of all lines above (until empty line) using `sum`

( `total`

) operator.

```
Line 1: $10
Line 2: $15
Result: sum
```

## Average

You can calculate an average of all lines above (until empty line) using `average`

( `avg`

) operator.

```
Line 1: $10
Line 2: $20
Result: average
```

## SI prefixes

SI-based units support all SI prefixes, both short and long form. Note that SI prefixes are case-sensitive. For example, use `MB`

for megabytes, not mB:

```
1 mm
2 picometers
3 GB
```

## Date & Time

To make time calculations more straightforward, 1 year is equal to 365 days, and 1 month equal to 1/12 of the year. In cases where results give non-integer value, round functions might be used to make an integer. Supported units: Second, minute, hour, day, week, month, year. Use `fromunix`

function to convert timestamp into dates.

```
round(1 month in days)
fromunix(1446587186)
```

## Temperature

Supported units: kelvin, celsius, fahrenheit

## Length

Supported units: meter, mil, points, lines, inch, hand, foot, yard, rod, chain, furlong, mile, cable, nautical mile, league. Note, since `in`

used as a conversion operator, you cannot use it for inches.

## Area

Supported units: hectare, are, acre and all "squared" length units. Use `square`

or `sq`

prefix for this case.

```
20 sq cm
30 square inches
11 sqm
```

## Volume

Supported units: Pint, quart, gallon, tea spoon, table spoon, cup. It is possible to use all length units with `cubic`

, `cu`

or `cb`

prefix.

```
20 cu cm
30 cubic inches
11 cbm
```

## Weight

Supported units: gram, tonne, carat, centner, pound, stone, ounce.

## Angular

Supported units: radians, degree. You can use both as text form of unit (radians, degrees) as sign. For example, 45 °

## Data

Bytes multiplies contain 1000 bytes. If you need 1024 multiplier, use kibibytes. Please note lowercase `b`

is used for bits, and uppercase `B`

for bytes.

## Format

Use hash symbol at the beginning of the line to make a header. If you want to comment part of the line, use double quotes. To comment all line, use double slash. Use colon to make a label (label will not be evaluated).

```
# This is header
$275 for the "Model 227"
// This is comment
Price: $11 + $34.45
```

## Shortcuts

Surround with parentheses | ⇧⌘0 |

Copy result on current line | ⇧⌘C |

Select all | ⌘A |

Delete all | ⎇⌘⌫ |

Copy all | ⎇⌘C |

Import | ⌘O |

Export | ⌘S |

⌘P |

## Import & Export

Numi does not modify imported files until you explicitly export them. All exported files have .numi extension. You can open .numi files with any text editor since Numi uses plain text and UTF-8 encoding to store files.

## Extensions

You can use JavaScript to extend Numi functionality with custom global variables, units or functions. More information available on GitHub.

## Alfred integration

Alfred is a popular productivity app for quick textual actions. In order to calculate via Numi in Alfred, you have to install Numi workflow first and enable Alfred integration in Numi preferences.

To use workflow make sure Numi is running. Prefix your calculations with `n`

, for example, `n (20% of 45)/12`

or `n $20 in Euro`

. Please note, time zones functionality is not available via integration.

## Translation

Anyone can participate in translation process.

- Sign up on the One Sky translation service
- Take a look at current state of translation for your language. Can't find it there? Contact us
- Start translating. You can filter for all untranslated phrases in interface, for example.